|
|
Chimneys
Three layer FIBO smoke
Fibo stack - is a fully equipped three layer stack system, comprising:
Heat and condensation resistant šamotinis insert;
Heat-resistant interlayer mineral wool produced without an organic binder;
Easy to install makšķerēšana.Godeļi outer shell - a modular tile;
Viršstoginės possibility of facing bricks;
FIBO smoke are:
Resistant to acids and corrosion: its negraužia condensate, so he and long-living
Resistant to high temperatures: Soot ignition supervised stack, stack will remain intact, insert nesideformuos
Three-ply: mineral wool does not significantly heat up the chimney outside - nenudegins touching the wall of the chimney, the heat will be transferred to the adjacent structures
Stable: šamotinis chimney shell and outer shell acts as two separate systems. Thermal liner movement is not transferred to the outside. This obviates the cleavage points of attachment.
Has the additional possibility of reinforcement. This is relevant for the installation of the outer part of the chimney.
Providing good traction: differential liner diameter allows you to select the optimum boiler
Sealed: insert fitted inside a special Ilai that prevents condensation entering the chimney exterior
Compact: takes up little space
Has an internal ventilation system: characteristics of the stack does not change with the times
Full designs: a quick and easy installation (per day up to 6 months)
Suitable for a wide range of fuel boilers
Exterior brick or plaster finishing option
Do not have a continuous metal parts on the chimney for the construction of lightning arresters
Under the chosen inner diameter of the chimney liner are completed and all the other details. The upper part of the chimney brick finishes selecting the additional coverage is completed and the base plate Cover plate. The use of gas boilers, chimney must be completed with the condensate collector.
Two-layer "Fibo" chimney - is the complete stack system, comprising:
Heat and condensation resistant šamotinis insert;
Easy to install makšķerēšana.Godeļi outer shell - a modular tile;
External brick or plaster finishing option.
Two-layer stack of three layer differs in that it has no wool.
Stack can kompletuoti with ventilation channels.
Longitudinal section of the chimney stack of Mini-Set:
1 - concrete foundation;
2 - Šamotinis pipe with holes for cleaning;
3 - Šamotinis shell ash hatches;
4 - Ash hatch;
5 - External makšķerēšana.Godeļi modular chimney tile;
6 - Šamotinis pipe connect (45 ° or 90 °);
7 - choke;
8 - Fire-resistant blend "Vetonit Tulenkestävä muurauslaasti";
9 - Šamotinis tube (d = 160 mm)
10 - Masonry mixture "Vetonit M100/600;
11 - Steel cuffs;
12 - Cover plate.
According to the height of the stack are available for
all the necessary details.
The upper part of the chimney finishes selecting
bricks, completed with an additional coating base plate.
Stack up to the epithelium can be completed with concrete slab
or metal roof.
The use of gas boilers, chimney must be complete with
surinkikliu condensate.
Stack can be assembled with the addition of air valves,
designed to regulate or close the air movement of the chimney.
SOLID FUELS
Residential buildings commonly used wood, but used for both coal and coke. Fire Protection Department recommends a heating a general rules: kūrenkite only dry wood. Until the fire burns for a full neužstumkite valves. Do not force the wood oven - please use it in small portions. Nekūrenkite oven full. On the stove or fireplace floor should always be 20 - 40 mm thick ash / sand layer.
Liquid and gaseous fuels
Burning liquid gaseous fuels, the flue gas temperature is low, because they are slow and the remainder of the condensate quantity - great. Burning 1 liter of oil or fuel oil, is characterized by more than 1 liter of water, which is in the form of vapor to evaporate through the chimney. It is important that the smoke gas nesikondensuotų chimney. Good "Fibo" chimney insulation prevents condensation of steam.
Diesel AUTO-IGNITION
Incorrect firing, in particular wood, chimney soot and carbon monoxide meet, posing a fire hazard. Soot ignition, immediately call the fire department. Close all valves and traction control and try to extinguish the fire powder fire extinguishers in the ash hatch at the bottom. Negesinkite burning of soot in smoke water - can crack chimney. After the fire, prior to the operation of the chimney must be inspected by firefighters.
HOW TO CHOOSE smoke?
Chimneys
HOW TO CHOOSE smoke?
The most common one is enough accommodation unit with a single chimney flue. However, if you planned to burn two different fuels, the fire rate provides for two separate chimneys. In this case, it is advisable to install a double-stack system. Choose a double outer sheath can be if it is planned to install near Chimney ventilation channel. Semi-detached house in every apartment we recommend installation of a separate chimney. Thereby protecting the neighborhood from the smoke entering the premises and different air flow in case of bad draws, resolve issues of sound insulation.
Smoke-PLANNING
The construction of the chimney should be retained for the following key principles:
Chimney flue should be a constant cross-section from the bottom up to the smoke outlet.
Other structures, the transition to the chimney must be designed and seal so that the heat of the chimney and the expansion of its structures undermine each other.
All the stack material must be fire resistant.
With a high chimney draft.
Located outside of the chimney must be apdailinama plaster, bricks or skardinama.
Height above Pitched Roof
Chimney above the roof must appear sufficient to produce a good draft and avoid creating a fire hazard. If the chimney away from the ridge up to 1.5 m, the chimney above the ridge must occur at least 0.8 on If the chimney is located between 1.5 and 3 m, the stack height should be no lower than the roof ridge height. If the chimney from the ridge is more than 3 m, then brėžiame imaginary inclined 10 ° down line that is at the intersection with the axis of the stack and determine the height of the chimney. The best traction is guaranteed outlet, exiting above the roof ridge.
Schiedel chimneys
Chimneys
Versatile and extremely useful chimney system. Facilities for solid, liquid fuels,
gas, low and high exhaust gas temperatures.
Must Berlin and Warsaw Engineering Institute, as a moisture-resistant chimney,
permission to use the building.
Special Features
system is suitable for exhaust gas temperatures from 80 ° C to 400 ° C.
resistant to the effects of condensate
soot fire resistance
diameters range from 12cm to 50cm
gases through high-quality ceramic tube šamotinės
corrosion-resistant
high resistance to acids
Water-resistance
fireproof for 60 minutes.
ceramic tube is CE marked in accordance with standard EN-1457
Isolated "Schiedel" stack is mounted with the ventilation of the series of factory components, exactly matching each other.
Ceramic tube
Round inner tube is made of high-grade non-combustible šamotinės ceramics. Its technical characteristics of the chimney
requirements.
The best characteristics of the product
The inner ceramic tube has a high resistance to temperature and its changes.
There is a tight and highly resistant to acids.
Heated tube weight - very low.
|
|
